Bathroom accessories complete professional set





05/27/2018
Bathroom accessories, complete professional set (not toys).
Fully functional and usable.

Here table Soapdish.
All parts in STL here: https://www.redpah.com/product/4084/ (with a small contribution)
Double robe hook Towel bar 35 cm/14 inch (for printers with at least 30x30 cm of area) Soapdish holder Toilet brush holder (diameter 70 mm/2.75 inch) Toilet paper holder - Vertical Toilet paper holder - Horizontal Toothbrushs holder Oral-B Toothbrushs holder
The elements can be fixed to the wall with 2 screws and the special rear recess allows the use of silicone or double-sided adhesive tape without seeing anything.
A small cover (the same for all the elements) allows to hide the screws and can be easily removed in case of need.
With acetone vapors or "XTC-3D resin" you can get a beautiful shiny industrial appearance and no one will say that you printed it in your home.

The production is optimized thanks to "Ring_Support" and "Glass_Container", parts used to compose different elements (see under).

Toothbrushs Holder: Ring_Support + Glass_Container + Toothbrushs_Cover
Oral-B Toothbrushs Holder: Ring_Support + Glass_Container + OralB_Cover + OralB_Container
Soapdish holder. : RingSupport + Soapdish_Element
Toilet brush holder: Ring_Support + Glass_Container

Tips for printing:
To make everything more resistant, tilt the elements to be printed at 45°-50°, so there will be filaments that will better connect the hook to the fixed part on the wall (the .stl files are already set).


Coperchietto_viti_0.stl (58kB)




Older Post Newer Post